Endorphines Shuttle Mate

USB MIDI INTERFACE / HOST / MIDI ROUTER-CONVERTER

Merge MIDI and USB-MIDI into one MIDI and USB MIDI flow
Perfect mate for Shuttle Control to be able to connect two MIDI devices into Shuttle’s 'to host' input (for example, drummachine or sequencer and midi controller)
no bus-power required—device runs fully on power delivered from USB socket but also can be powered from the buss-board
works also as a portable USB host for USB-MIDI equipped controllers

Power consumption:
0 mA +12V
0 mA -12V
0 mA 5V

Dimensions:
6 HP
33 mm deep

FAQ:

I connected my device via Midi cable and it doesn’t work.
If you use standard Midi cable only, you need to power the S&M from the case. If you use USB Midi in addition or USB Midi only, no supporting power is needed.

My Shuttle Mate stops working as soon as I connect it to my computer.
Make sure there’s no Midi loop generated somewhere by connecting your computer to the S&M.

How can I replace the panel with other color?
Check the Endorphines website and panels replacement guide. Also don’t forget the knobs and buttons.

Rainbow cable pinout. Side red/brown pair of pins always correspond to -12V similar as with typical gray ribbon cable.