Konstant Lab HammerPWR

Over the span, of many years Konstant Lab has been designing, building, prototyping, and producing reliable eurorack modular power supplies meant to protect you and your modules that found their home in many eurorack modular systems, DIY cases, professional studios, and live applications across the whole world. 

Over the years Konstant Lab's team has been asked many times by their users to provide a definite eurorack modular power supply that would be able to sustain and protect the most “busy” of setups. Behind the scenes, they were slowly prototyping and developing a brand new type of eurorack modular power supply that would provide even more stable clean power and further address many of the intrinsic topics which plague the daily eurorack modular musician.

Introducing ~ HammerPWR. Why HammerPWR you ask? It is quite simple. It packs a powerful 100W unit with an output that can supply enough juice to the most hardcore eurorack system out there. Two of these will get your eurorack modular system rig going for a lifetime.

In the beginning, they have taken our years of experience from the eurorack modular realm, industrial electronic design background, their craft, and feedback of their users to transmute it all into the strongest eurorack modular power supply meant for use in the hardest of conditions on the market featuring the highest power density money can buy. The ideal solution for the largest of systems featuring many power-hungry analog/digital modules or modules which draw a lot of current needed for their ensured smooth operation. 

Konstant Lab's system of filtered protection on the inputs and outputs of the power supply stays in place with minor tweaks to its core design making sure that your system will keep operating under hassle-free, low-noise, artifact-free conditions while also being protected from noises present in the power grid at times so your system and modules are safe and intact from external occurrences, mishaps, and influences. 

To ensure the lowest possible noise within your system they have used a special type of converters with low noise on their outputs and we have split the +12V / 5A power branches by 2,5A + 2,5A to further decrease inherent influence between modules. Two sets of output terminals then further elevate the stress of cables connected to the bus board for longer service life.

HammerPWR is safely externally powered from a 120W power brick (Meanwell GST120A-P1M – sold separately) to make sure you and your modules are safe as well under all conditions.

The small dimensions of HammerPWR make it an ideal choice for any system including skiff and DIY where depth and size can be your concern.

Easy to install push to connect system – WAGO 256 series shockproof + push to connect terminals ensure easy installation of HammerPWR within your case.